My Cart $-.--
Shop by Category
0
Home BRK® Direct Wire Ionization Smoke & Carbon Monoxide...

BRK® Direct Wire Ionization Smoke & Carbon Monoxide (CO) Combination Alarm With Battery Backup

PART 112312
BRAND BRK
Mfg #SC9126BTCA
TBD
QUANTITY

About this item

The combination smoke and carbon monoxide alarm shall be a BRK Model SC9126BTCA and shall provide at a minimum the following features and functions:

  • An Ionization smoke sensing chamber.
  • An Electrochemical co sensing chamber.
  • The unit shall be capable of self restoring.
  • Fully screened sensing chamber to resist entry of small insects thereby reducing the probability of unwanted alarms.
  • Powered by 120V AC, 60Hz with 9V battery backup and a solid state piezo horn rated at 85dB at 10 ft.
  • A visual green LED power-on indicator to confirm unit is receiving power or is in alarm.
  • A full function test button should check all alarm functions by simulating a smoke and then co condition, causing the unit to alarm with condition specific alarm patterns.
  • Two silence features - Temporarily silence unwanted nuisance alarms and low battery.
  • Two Latching features: Alarm Latch to easily identify initiating alarm after alarm condition has subsided. Low battery latch: to visually identify which unit is in low battery condition.
  • The unit shall be capable of operating between 40°F (4°C) and 100°F (38°C) and relative humidity between 10% and 90%.
  • The unit shall have a gasketless base for easy installation and be capable of keeping alarm secure over a wide rotation range to allow for true alarm alignment.
  • The unit shall have a plug in connector and be capable of interconnection of up to 18 alarms, 12 of which can be smoke alarms.
  • Mfg #SC9126BTCA
Make & Model
Brand BRK
Part # SC9126BTCA
Specifications
Color Family White
Certifications & Standards
TAA/BAA Compliant 1
Packaging Dimensions
Height 7.800
295_SC9126BTCA_Spec_Sheet_CA_ENG
295_SC9126BTCA_Spec_Sheet_CA_ENG.pdf