ROBERTS® 2057 VCT-EZ® Adhesive is a SBR latex adhesive that provides excellent grab and high residual tack. This superior grade adhesive brushes, rolls or trowels on and helps hold the tile firmly in place, even when subjected to repeated cleaning and mopping.
Powered by Microban®, this antimicrobial product protection helps fight the growth of stain and odor-causing bacteria that can cause product degradation.
When spread thinly as instructed, the adhesive dries correctly and turns clear, allowing chalk lines to remain visible. This adhesive is also suitable for installing vinyl-composition or vinyl-asphalt tile over existing vinyl-composition or vinyl-asphalt subfloors that are free from waxes, sealers and finishes.
For interior use only, not recommended for installation of luxury vinyl tile (LVT), luxury vinyl plank (LVP) or solid vinyl-backed products.
- SBR latex, solvent-free adhesive offering quick dry time and enhanced grab
- For installation of vinyl composition tile (excluding self-stick), including tile-over-tile installation
- For direct bond and double bond installation, bonds with concrete, APA rated plywood, one layer of existing and finish free VCT, aged cutback adhesive residue, primed gypcrete (refer to ASTM F2419) and terrazzo
- For indoor residential and moderate commercial use
- Approximately 60 minutes open time, 8 hours working time, and 24 hours curing time
- Low odor and low VOC during application
- Moisture Control Adhesive - up to 8 lbs. MVER and 85% RH
- Powered by Microban® for superior mold and mildew protection
- Covers up to 240 sq. ft. per gallon depending on trowel type, substrate, and installation conditions
- Please refer to supplemental product documentation for specific coverages based on trowel and flooring types; installation methods; substrates; warranty; additional guidance